{"title":"Battery Chargers","description":null,"products":[{"product_id":"12v-20a-ac-battery-charger","title":"12V 20A AC Battery Charger","description":"\u003cp\u003e\u003cspan\u003eThe Enerdrive | Dometic 20A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003ch3\u003e20A AC Battery Charger Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMultistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.\u003c\/li\u003e\n\u003cli\u003eSeparate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.\u003c\/li\u003e\n\u003cli\u003eProgrammable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.\u003c\/li\u003e\n\u003cli\u003eCurrent Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).\u003c\/li\u003e\n\u003cli\u003eSmart Charging: The 20A battery charger will regulate its output based on the loads connected to your battery banks.\u003c\/li\u003e\n\u003cli\u003eWide AC Input Range: Operates on both 110V \/ 60Hz and 240V \/ 50Hz.\u003c\/li\u003e\n\u003cli\u003eLED Display: Easy to use “set and select” menu along with scrolling charger status.\u003c\/li\u003e\n\u003cli\u003eSilent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Battery temperature sensor included with 7.5 meter cable.\u003c\/li\u003e\n\u003cli\u003e5 Year Warranty from an Australian company renowned for customer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMultistage Charging Process\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 20A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/p\u003e\n\u003cp\u003eAs dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our multistage smart 20A battery charger delivers four primary charge stages:-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 1\u003c\/b\u003e\u003c\/i\u003e – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 2\u003c\/b\u003e\u003c\/i\u003e – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 3\u003c\/b\u003e\u003c\/i\u003e – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 4\u003c\/b\u003e\u003c\/i\u003e\u003cspan\u003e \u003c\/span\u003e– Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive | Dometic Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e1 PRIORITY – Charge Where You Need it Most\u003c\/h3\u003e\n\u003cp\u003eThe 20A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 \u0026amp; 3 batteries.\u003c\/p\u003e\n\u003cp\u003eThe priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks.\u003c\/p\u003e\n\u003cp\u003eIn the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1.\u003c\/p\u003e\n\u003ch3\u003eAll About Lithium\u003c\/h3\u003e\n\u003cp\u003eThe recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current \/ constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the charger algorithm perfectly supporting Lithium battery requirements.\u003c\/p\u003e\n\u003ch3\u003eThe Display Panel\u003c\/h3\u003e\n\u003cp\u003eThe 20A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float \/ power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode.\u003c\/p\u003e\n\u003cp\u003eSilence when you need it – By pressing the “SEL” button for 5 seconds, the ePOWER Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on \u0026amp; full output’ setting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg decoding=\"async\" class=\"alignleft\" src=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png\" alt=\"\" width=\"190\" height=\"190\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eBattery Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eIncluded standard with all Battery Chargers.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/AC-Charger-Combination-Manual-Rev-5.5_2023.pdf?v=1788002510\" target=\"_blank\" rel=\"noopener\"\u003eAC Charger Combination Manual Rev 5.5\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3REM-Instructions-V3.pdf?v=1788002502\" target=\"_blank\" rel=\"noopener\"\u003eEN3REM ePOWER Remote Installation and Operation Guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Enerdrive-ePOWER-Charger-Lithium-Algorithm-1.pdf?v=1788002506\" target=\"_blank\" rel=\"noopener\"\u003eePOWER Lithium Charging Profile\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/ePOWER-Charger-Brochure_2022_WEB.pdf?v=1788002514\" target=\"_blank\" rel=\"noopener\"\u003eePOWER Battery Charger Brochure\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52831952306461,"sku":"EN31220","price":551.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN31220-Web-Images.1460.jpg?v=1788002365"},{"product_id":"12v-40a-ac-battery-charger","title":"12V 40A AC Battery Charger","description":"\u003cp\u003e\u003cspan\u003eThe Enerdrive | Dometic 12V 40A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003ch3\u003eEnerdrive | Dometic 12V 40A AC Battery Charger Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMultistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.\u003c\/li\u003e\n\u003cli\u003eSeparate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.\u003c\/li\u003e\n\u003cli\u003eProgrammable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.\u003c\/li\u003e\n\u003cli\u003eCurrent Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).\u003c\/li\u003e\n\u003cli\u003eSmart Charging: The Enerdrive | Dometic 12V 40A AC Battery Charger will regulate its output based on the loads connected to your battery banks.\u003c\/li\u003e\n\u003cli\u003eWide AC Input Range: Operates on both 110V \/ 60Hz and 240V \/ 50Hz.\u003c\/li\u003e\n\u003cli\u003eLED Display: Easy to use “set and select” menu along with scrolling charger status.\u003c\/li\u003e\n\u003cli\u003eSilent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Battery temperature sensor included with 7.5 meter cable.\u003c\/li\u003e\n\u003cli\u003e5 Year Warranty from an Australian company renowned for customer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMultistage Charging Process\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 12V 40A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/p\u003e\n\u003cp\u003eAs dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our multistage smart 40A battery charger delivers four primary charge stages:-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 1\u003c\/b\u003e\u003c\/i\u003e – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 2\u003c\/b\u003e\u003c\/i\u003e – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 3\u003c\/b\u003e\u003c\/i\u003e – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 4\u003c\/b\u003e\u003c\/i\u003e\u003cspan\u003e \u003c\/span\u003e– Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive | Dometic 12V 40A AC Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e 1 PRIORITY – Charge Where You Need it Most\u003c\/h3\u003e\n\u003cp\u003eThe 12V 40A AC Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 \u0026amp; 3 batteries.\u003c\/p\u003e\n\u003cp\u003eThe priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks.\u003c\/p\u003e\n\u003cp\u003eIn the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1.\u003c\/p\u003e\n\u003ch3\u003eAll About Lithium\u003c\/h3\u003e\n\u003cp\u003eThe recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current \/ constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic 12V 40A AC Battery Charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the charger algorithm perfectly supporting Lithium battery requirements.\u003c\/p\u003e\n\u003ch3\u003eThe Display Panel\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 12V 40A AC Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen. When in float \/ power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode.\u003c\/p\u003e\n\u003cp\u003eSilence when you need it – By pressing the “SEL” button for 5 seconds, the Enerdrive | Dometic 12V 40A AC Battery Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on \u0026amp; full output’ setting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg decoding=\"async\" class=\"wp-image-17021 alignleft\" src=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png\" alt=\"\" width=\"190\" height=\"190\" srcset=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png 1200w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-500x500.png 500w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-100x100.png 100w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1000x1000.png 1000w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-150x150.png 150w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-300x300.png 300w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-768x768.png 768w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1024x1024.png 1024w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-400x400.png 400w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-418x418.png 418w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-512x512.png 512w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-600x600.png 600w\" sizes=\"(max-width: 190px) 100vw, 190px\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBattery Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eIncluded standard with all Enerdrive | Dometic Battery Chargers.\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/AC-Charger-Combination-Manual-Rev-5.5_2023.pdf?v=1788002510\" rel=\"noopener\" target=\"_blank\"\u003eAC Charger Combination Manual Rev 5.5\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3REM-Instructions-V3.pdf?v=1788002502\" rel=\"noopener\" target=\"_blank\"\u003eEN3REM ePOWER Remote Installation and Operation Guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Enerdrive-ePOWER-Charger-Lithium-Algorithm-1.pdf?v=1788002506\" rel=\"noopener\" target=\"_blank\"\u003eePOWER Lithium Charging Profile\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/ePOWER-Charger-Brochure_2022_WEB.pdf?v=1788002514\" rel=\"noopener\" target=\"_blank\"\u003eePOWER Battery Charger Brochure\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52832171393309,"sku":"EN31240","price":699.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN31240.jpg?v=1788010093"},{"product_id":"12v-60a-ac-battery-charger","title":"12V 60A AC Battery Charger","description":"\u003cp\u003e\u003cspan\u003eThe Enerdrive | Dometic 60A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003ch3\u003e60A AC Battery Charger Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMultistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.\u003c\/li\u003e\n\u003cli\u003eSeparate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.\u003c\/li\u003e\n\u003cli\u003eProgrammable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.\u003c\/li\u003e\n\u003cli\u003eCurrent Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).\u003c\/li\u003e\n\u003cli\u003eSmart Charging: The 60A battery charger will regulate its output based on the loads connected to your battery banks.\u003c\/li\u003e\n\u003cli\u003eWide AC Input Range: Operates on both 110V \/ 60Hz and 240V \/ 50Hz.\u003c\/li\u003e\n\u003cli\u003eLED Display: Easy to use “set and select” menu along with scrolling charger status.\u003c\/li\u003e\n\u003cli\u003eSilent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Battery temperature sensor included with 7.5 meter cable.\u003c\/li\u003e\n\u003cli\u003e5 Year Warranty from an Australian company renowned for customer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMultistage Charging Process\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 60A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/p\u003e\n\u003cp\u003eAs dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our multistage smart 60A battery charger delivers four primary charge stages:-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 1\u003c\/b\u003e\u003c\/i\u003e – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 2\u003c\/b\u003e\u003c\/i\u003e – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 3\u003c\/b\u003e\u003c\/i\u003e – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 4\u003c\/b\u003e\u003c\/i\u003e\u003cspan\u003e \u003c\/span\u003e– Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e 1 PRIORITY – Charge Where You Need it Most\u003c\/h3\u003e\n\u003cp\u003eThe ePOWER 60A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 \u0026amp; 3 batteries.\u003c\/p\u003e\n\u003cp\u003eThe priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks.\u003c\/p\u003e\n\u003cp\u003eIn the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1.\u003c\/p\u003e\n\u003ch3\u003eAll About Lithium\u003c\/h3\u003e\n\u003cp\u003eThe recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current \/ constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the charger algorithm perfectly supporting Lithium battery requirements.\u003c\/p\u003e\n\u003ch3\u003eThe Display Panel\u003c\/h3\u003e\n\u003cp\u003eThe 60A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float \/ power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode.\u003c\/p\u003e\n\u003cp\u003eSilence when you need it – By pressing the “SEL” button for 5 seconds, the Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on \u0026amp; full output’ setting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg decoding=\"async\" class=\"wp-image-17021 alignleft\" src=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png\" alt=\"\" width=\"190\" height=\"190\" srcset=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png 1200w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-500x500.png 500w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-100x100.png 100w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1000x1000.png 1000w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-150x150.png 150w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-300x300.png 300w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-768x768.png 768w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1024x1024.png 1024w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-400x400.png 400w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-418x418.png 418w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-512x512.png 512w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-600x600.png 600w\" sizes=\"(max-width: 190px) 100vw, 190px\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBattery Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eIncluded standard with all Battery Chargers.\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/AC-Charger-Combination-Manual-Rev-5.5_2023.pdf?v=1788002510\" rel=\"noopener\" target=\"_blank\"\u003eAC Charger Combination Manual Rev 5.5\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3REM-Instructions-V3.pdf?v=1788002502\" rel=\"noopener\" target=\"_blank\"\u003eEN3REM ePOWER Remote Installation and Operation Guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Enerdrive-ePOWER-Charger-Lithium-Algorithm-1.pdf?v=1788002506\" rel=\"noopener\" target=\"_blank\"\u003eePOWER Lithium Charging Profile\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/ePOWER-Charger-Brochure_2022_WEB.pdf?v=1788002514\" rel=\"noopener\" target=\"_blank\"\u003eePOWER Battery Charger Brochure\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52832176767261,"sku":"EN31260","price":965.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN31260-Web-Images.1473.jpg?v=1788010651"},{"product_id":"12v-100a-ac-battery-charger","title":"12V 100A AC Battery Charger","description":"\u003cp\u003e\u003cspan\u003eThe Enerdrive | Dometic 100A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003ch3\u003e100A AC Battery Charger Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMultistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.\u003c\/li\u003e\n\u003cli\u003eSeparate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.\u003c\/li\u003e\n\u003cli\u003eProgrammable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.\u003c\/li\u003e\n\u003cli\u003eCurrent Control: User adjustable current output (e.g. Dial the 100amp unit back to run off a 1kVA generator).\u003c\/li\u003e\n\u003cli\u003eSmart Charging: The ePOWER 100A battery charger will regulate its output based on the loads connected to your battery banks.\u003c\/li\u003e\n\u003cli\u003eWide AC Input Range: Operates on both 110V \/ 60Hz and 240V \/ 50Hz.\u003c\/li\u003e\n\u003cli\u003eLED Display: Easy to use “set and select” menu along with scrolling charger status.\u003c\/li\u003e\n\u003cli\u003eSilent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.\u003c\/li\u003e\n\u003cli\u003e5 Year Warranty from an Australian company renowned for customer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMultistage Charging Process\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 100A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/p\u003e\n\u003cp\u003eAs dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our multistage smart 100A battery charger delivers four primary charge stages:-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 1\u003c\/b\u003e\u003c\/i\u003e – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 2\u003c\/b\u003e\u003c\/i\u003e – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 3\u003c\/b\u003e\u003c\/i\u003e – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 4\u003c\/b\u003e\u003c\/i\u003e\u003cspan\u003e \u003c\/span\u003e– Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive 100A Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e1 PRIORITY – Charge Where You Need it Most\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive 100A Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 \u0026amp; 3 batteries.\u003c\/p\u003e\n\u003cp\u003eThe priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks.\u003c\/p\u003e\n\u003cp\u003eIn the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1.\u003c\/p\u003e\n\u003ch3\u003eAll About Lithium\u003c\/h3\u003e\n\u003cp\u003eThe recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current \/ constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive 100A charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the Enerdrive charger algorithm perfectly supporting Lithium battery requirements.\u003c\/p\u003e\n\u003ch3\u003eThe Display Panel\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive 100A Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen. When in float \/ power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode.\u003c\/p\u003e\n\u003cp\u003eSilence when you need it – By pressing the “SEL” button for 5 seconds, the Enerdrive Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on \u0026amp; full output’ setting.\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/AC-Charger-Combination-Manual-Rev-5.5_2023.pdf?v=1788002510\" rel=\"noopener\" target=\"_blank\"\u003eAC Charger Combination Manual Rev 5.5\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3REM-Instructions-V3.pdf?v=1788002502\" rel=\"noopener\" target=\"_blank\"\u003eEN3REM ePOWER Remote Installation and Operation Guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Enerdrive-ePOWER-Charger-Lithium-Algorithm-1.pdf?v=1788002506\" rel=\"noopener\" target=\"_blank\"\u003eePOWER Lithium Charging Profile\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/ePOWER-Charger-Brochure_2022_WEB.pdf?v=1788002514\" rel=\"noopener\" target=\"_blank\"\u003eePOWER Battery Charger Brochure\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52832177946909,"sku":"EN312100","price":1507.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN312100.1657.jpg?v=1788010794"},{"product_id":"24v-30a-ac-battery-charger","title":"24V 30A AC Battery Charger","description":"\u003cp\u003e\u003cspan\u003eThe Enerdrive | Dometic 30A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003ch3\u003e30A AC Battery Charger Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMultistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.\u003c\/li\u003e\n\u003cli\u003eSeparate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.\u003c\/li\u003e\n\u003cli\u003eProgrammable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.\u003c\/li\u003e\n\u003cli\u003eCurrent Control: User adjustable current output (e.g. Dial the 30amp unit back to run off a 1kVA generator).\u003c\/li\u003e\n\u003cli\u003eSmart Charging: The Enerdrive | Dometic 24V 30A AC Battery Charger will regulate its output based on the loads connected to your battery banks.\u003c\/li\u003e\n\u003cli\u003eWide AC Input Range: Operates on both 110V \/ 60Hz and 240V \/ 50Hz.\u003c\/li\u003e\n\u003cli\u003eLED Display: Easy to use “set and select” menu along with scrolling charger status.\u003c\/li\u003e\n\u003cli\u003eSilent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.\u003c\/li\u003e\n\u003cli\u003eTemperature Sensor: Battery temperature sensor included with 7.5 meter cable.\u003c\/li\u003e\n\u003cli\u003e5 Year Warranty from an Australian company renowned for customer support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMultistage Charging Process\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 24V 30A AC Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.\u003c\/p\u003e\n\u003cp\u003eAs dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our multistage smart 30A AC battery charger delivers four primary charge stages:-\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 1\u003c\/b\u003e\u003c\/i\u003e – Bulk or Boost Charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery capacity is recovered as fast as possible.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 2\u003c\/b\u003e\u003c\/i\u003e – Absorption Charge; With the charger voltage held steady the remaining 20% is replaced allowing the current to drop as the battery approaches its full charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 3\u003c\/b\u003e\u003c\/i\u003e – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged while supporting any additional loads connected to the battery, such as DC lighting and refrigerators. This stage allows for the charger to be used as a DC power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003ci\u003e\u003cb\u003eStage 4\u003c\/b\u003e\u003c\/i\u003e\u003cspan\u003e \u003c\/span\u003e– Maintenance; This stage is a regular timed “return to bulk” stage. After 7 days of constant operation in “float” the Enerdrive | Dometic 24V 30A AC Battery Charger will switch the charger from float to bulk to agitate the batteries electrolyte helping to provide an extended service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003e 1 PRIORITY – Charge Where You Need it Most\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe Enerdrive | Dometic 24V 30A AC Battery Charger delivers a priority charge to Bank 1, or your main house battery bank which allows the charger to get this bank recharged the quickest, then transition the cycle to the lesser bank 2 \u0026amp; 3 batteries. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe priority function also allows you to have a battery chemistry different to the other two, such as an AGM battery for house and lead calcium for your start banks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn the event that all 3 banks are in need of a charge, an over-ride function helps recover all 3 banks quickly and evenly before switching back to prioritise on Bank 1.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eAll About Lithium\u003c\/h3\u003e\n\u003cp\u003eThe recent advances in high capacity Lithium battery technology have seen the need to develop a battery charger suited to their needs. With most traditional ‘smart’ chargers their suitability to Lithium batteries is limited. Lithium batteries require a constant current \/ constant voltage charge algorithm and are unique in that almost every amp-hour of charge delivered by the charger is accepted as one amp hour into the battery, hence the need to deliver a constant current as long as possible.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic 24V 30A AC Battery Charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). The graph shows the charger algorithm perfectly supporting Lithium battery requirements.\u003c\/p\u003e\n\u003ch3\u003eThe Display Panel\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 24V 30A AC Battery Charger display gives you all the information you need for the operation of your charger. At a glance, key information such as charger amps, battery voltage and charge state continually alternate on the screen.When in float \/ power supply mode, the load amps are displayed so you can see exactly what the charger is doing. The display also allows you to program all settings of the charger, as well as activate the silent mode.\u003c\/p\u003e\n\u003cp\u003eSilence when you need it – By pressing the “SEL” button for 5 seconds, the Charger enters the ‘Silent’ mode that prohibits the fan from working. This ensures totally silent and safe operation at night, ideal if the charger is located close to your sleeping quarters. Silent mode limits current output to no more than 50%, and is programmed to remain on for 12 hours before automatically returning to a normal ‘fan-on \u0026amp; full output’ setting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg decoding=\"async\" class=\"wp-image-17021 alignleft\" src=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png\" alt=\"\" width=\"190\" height=\"190\" srcset=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png 1200w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-500x500.png 500w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-100x100.png 100w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1000x1000.png 1000w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-150x150.png 150w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-300x300.png 300w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-768x768.png 768w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1024x1024.png 1024w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-400x400.png 400w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-418x418.png 418w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-512x512.png 512w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-600x600.png 600w\" sizes=\"(max-width: 190px) 100vw, 190px\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBattery Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eIncluded standard with all Battery Chargers.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/AC-Charger-Combination-Manual-Rev-5.5_2023.pdf?v=1788002510\" rel=\"noopener\" target=\"_blank\"\u003eAC Charger Combination Manual Rev 5.5\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3REM-Instructions-V3.pdf?v=1788002502\" rel=\"noopener\" target=\"_blank\"\u003eEN3REM ePOWER Remote Installation and Operation Guide\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Enerdrive-ePOWER-Charger-Lithium-Algorithm-1.pdf?v=1788002506\" rel=\"noopener\" target=\"_blank\"\u003eePOWER Lithium Charging Profile\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/How-to-Parallel-2-x-ePOWER-60-Chargers.pdf?v=1788011078\" target=\"_blank\" rel=\"noopener\"\u003eConnecting EN32430 in Parallel\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52832178831645,"sku":"EN32430","price":1046.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN32430-Web-Images.1488.jpg?v=1788010915"},{"product_id":"12v-40a-dc-dc-battery-charger","title":"12V 40A+ DC-DC Battery Charger","description":"\u003cp\u003e\u003cspan\u003eThe Enerdrive | Dometic 12V 40A+ (up to 50A*) DC-DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main\/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. *Vehicle Input limited to 50A, Vehicle Input voltage needs to be higher than output voltage to achieve 50A *Solar Input limited to 30A, Utilising a Higher voltage array will allow the output Amps to be greater than the 30A input limit\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo totally independent DC Inputs for both engine and solar regulation charging one house battery bank output\u003c\/li\u003e\n\u003cli\u003eDC M6 screw terminals that will allow for large battery cable connection between all sources\u003c\/li\u003e\n\u003cli\u003eA dedicated Maximum Power Point (MPPT) solar regulator\u003c\/li\u003e\n\u003cli\u003eThe same battery algorithms as included in our AC mains battery charger. GEL, AGM, Flooded, Lithium and the ability to create  a full custom profile\u003c\/li\u003e\n\u003cli\u003eVehicle input allows for either\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e12 or 24v\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand a maximum solar input of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e45V\/800W\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e40A+ output up to 40+°C with thermo controlled fan cooling\u003c\/li\u003e\n\u003cli\u003eFully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage\u003c\/li\u003e\n\u003cli\u003eTemperature sensor included with charger for more accurate battery charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Enerdrive | Dometic 12V 40A+ DC-DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main\/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.\u003c\/p\u003e\n\u003cp\u003eDuring normal operation the DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.\u003c\/p\u003e\n\u003ch3\u003eMultistage Charging Process\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 12V 40A+ (up to 50A*) DC-DC Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries.\u003c\/p\u003e\n\u003cp\u003eEnerdrive | Dometic 12V 40A+ (up to 50A*) DC-DC Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array.\u003c\/p\u003e\n\u003cp\u003eAs dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive | Dometic DC2DC 40A+ smart charger delivers three primary charge stages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 3\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.\u003c\/p\u003e\n\u003ch3\u003eSmart Charging Feature\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic 12V 40A+ (up to 50A*) DC-DC Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The Enerdrive | Dometic 12V 40A+ (up to 50A*) DC-DC Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so.\u003c\/p\u003e\n\u003cp\u003e\u003cimg decoding=\"async\" class=\"wp-image-17021 alignleft\" src=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-300x300.png\" alt=\"\" width=\"272\" height=\"272\" srcset=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-300x300.png 300w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-500x500.png 500w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-100x100.png 100w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1000x1000.png 1000w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-150x150.png 150w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-768x768.png 768w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1024x1024.png 1024w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-400x400.png 400w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-418x418.png 418w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-512x512.png 512w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-600x600.png 600w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png 1200w\" sizes=\"(max-width: 272px) 100vw, 272px\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eBattery Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eIncluded standard with all Enerdrive | Dometic Battery Chargers.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2020\/07\/DC2DC40-User-Manual_V2.05_JAN-2026-1.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDC2DC40+ User Manual_V2.05_JAN 2026\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Plus-Appendix-A1-rev-1.0-WEB.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Plus-Appendix-A1-rev-1.0-WEB.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDC2DC+ Appendix A1 \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Plus-Appendix-A2-rev-1.0-WEB.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Plus-Appendix-A2-rev-1.0-WEB.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDC2DC+ Appendix A2\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Plus-Appendix-A3-rev-1.0-WEB.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Plus-Appendix-A3-rev-1.0-WEB.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDC2DC+ Appendix A3\u003c\/a\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-In-Vehicle-Installation-1.pdf\" rel=\"noopener\" target=\"_blank\"\u003eePOWER DC2DC In Vehicle\/Marine Wiring Diagram\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Towed-Installation-1.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/12\/DC2DC-Towed-Installation-1.pdf\" rel=\"noopener\" target=\"_blank\"\u003eePOWER DC2DC Towed Vehicle Wiring Diagram\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2022\/05\/DC2DC-Plus-A4-2022_V4_WEB.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2022\/05\/DC2DC-Plus-A4-2022_V4_WEB.pdf\" rel=\"noopener\" target=\"_blank\"\u003eePOWER DC2DC Plus Brochure\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2021\/10\/Smart-Alternator-Setup-for-DC2DC-no-IGN.pdf\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2021\/10\/Smart-Alternator-Setup-for-DC2DC-no-IGN.pdf\" rel=\"noopener\" target=\"_blank\"\u003eSmart Alternator\/Relay Wiring setup for DC2DC Charger\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2024\/02\/EN3DCREM_DC2DC-Remote-Panel-Instructions_V.3_FEB-2024.pdf\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2024\/02\/EN3DCREM_DC2DC-Remote-Panel-Instructions_V.3_FEB-2024.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eDC2DC Remote Panel Install\/Operations Manual\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52832223625501,"sku":"EN3DC40+","price":595.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3DC40.1642.jpg?v=1788012278"},{"product_id":"24v-30a-dc-dc-battery-charger","title":"24V 30A DC-DC Battery Charger","description":"\u003cdiv class=\"et_pb_module et_pb_wc_description et_pb_wc_description_0_tb_body et_pb_bg_layout_light  et_pb_text_align_left\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\n\u003cp\u003eThe Enerdrive | Dometic 24V 30A DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_module et_pb_wc_price et_pb_wc_price_0_tb_body\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo totally independent DC Inputs for both engine and solar regulation charging one house battery bank output\u003c\/li\u003e\n\u003cli\u003eDC M6 screw terminals that will allow for large battery cable connection between all sources\u003c\/li\u003e\n\u003cli\u003eA dedicated Maximum Power Point (MPPT) solar regulator\u003c\/li\u003e\n\u003cli\u003eThe same battery algorithms as included in our AC mains battery charger including a specific lithium charging profile\u003c\/li\u003e\n\u003cli\u003e30A output up to 40+°C with thermo controlled fan cooling\u003c\/li\u003e\n\u003cli\u003eFully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage\u003c\/li\u003e\n\u003cli\u003eTemperature sensor included with charger for more accurate battery charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Enerdrive | Dometic DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.\u003c\/p\u003e\n\u003cp\u003eDuring normal operation the Enerdrive | Dometic DC2DC Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.\u003c\/p\u003e\n\u003ch3\u003eMultistage Charging Process\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic DC2DC Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic DC2DC Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery banks permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array.\u003c\/p\u003e\n\u003cp\u003eAs dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive | Dometic DC2DC smart charger delivers three primary charge stages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 1\u003c\/strong\u003e – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 2\u003c\/strong\u003e – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage 3\u003c\/strong\u003e – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.\u003c\/p\u003e\n\u003ch3\u003eSmart Charging Feature\u003c\/h3\u003e\n\u003cp\u003eThe Enerdrive | Dometic DC2DC Battery Charger will regulate its output based on the loads connected to your battery banks. This function is important to maintain the life of your battery banks as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The Enerdrive | Dometic DC2DC Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so.\u003c\/p\u003e\n\u003cp\u003e\u003cimg decoding=\"async\" class=\"wp-image-17021 alignleft\" src=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-300x300.png\" alt=\"\" width=\"272\" height=\"272\" srcset=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-300x300.png 300w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-500x500.png 500w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-100x100.png 100w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1000x1000.png 1000w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-150x150.png 150w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-768x768.png 768w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-1024x1024.png 1024w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-400x400.png 400w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-418x418.png 418w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-512x512.png 512w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens-600x600.png 600w, https:\/\/enerdrive.com.au\/wp-content\/uploads\/2018\/10\/epower-charger-tempsens.png 1200w\" sizes=\"(max-width: 272px) 100vw, 272px\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eBattery Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eIncluded standard with all ePOWER Battery Chargers.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/DC2DC-24V-User-Manual-Rev-1.5-WEB.pdf?v=1788012541\" target=\"_blank\" rel=\"noopener\"\u003eUser Manual Rev 1.5 (902kb)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/DC2DC-24V-Appendix-A1-rev-1.0-WEB.pdf?v=1788012541\" target=\"_blank\" rel=\"noopener\"\u003eAppendix A1 Rev 1.0 (436kb)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/DC2DC-24V-Appendix-A2-rev-1.0-WEB.pdf?v=1788012544\" target=\"_blank\" rel=\"noopener\"\u003eAppendix A2 Rev 1.0 (293kb)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/DC2DC-24V-Appendix-A3-rev-1.0-WEB.pdf?v=1788012546\" target=\"_blank\" rel=\"noopener\"\u003eAppendix A3 Rev 1.0 (241kb)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2017\/07\/EN3DC30-Install-guide-Addendum.pdf\" target=\"_blank\" rel=\"noopener\"\u003eePOWER DC2DC Battery Charger Wiring Diagram\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"icon_paperclip\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2017\/07\/EN3DC30-Install-guide-Addendum-V2.pdf\" rel=\"noopener\" target=\"_blank\"\u003eePOWER DC2DC Battery Charger Wiring Diagram V2\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52832243319069,"sku":"EN3DC30-24","price":648.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3DC30-24.1600.jpg?v=1788012561"},{"product_id":"12v-100a-dc-dc-battery-charger","title":"12V 100A DC-DC Battery Charger","description":"\u003cdiv class=\"et_pb_module et_pb_wc_description et_pb_wc_description_0_tb_body et_pb_bg_layout_light  et_pb_text_align_left\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\n\u003cp\u003eFast charge your batteries with the Enerdrive | Dometic 12V 100A DC-DC Charger. With dual DC inputs for alternator and MPPT solar charging, the unit can draw power from either your vehicle’s alternator or solar panels.\u003c\/p\u003e\n\u003cp\u003eEngineered for high-output systems, this solution is the perfect match for vehicles, trucks, caravans, motorhomes, and marine vessels equipped with large alternators. Experience superior efficiency with a fully programmable remote LCD display and intelligent multi-stage charging.Consult your vehicle handbook or dealer to confirm capability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra fast charging up to 100A via alternator, or 80A via Solar\u003c\/li\u003e\n\u003cli\u003eTwo totally independent DC Inputs for both engine and solar regulation charging one house battery bank output\u003c\/li\u003e\n\u003cli\u003eA dedicated Maximum Power Point (MPPT) solar regulator\u003c\/li\u003e\n\u003cli\u003eMulti-stage charging algorithms\u003c\/li\u003e\n\u003cli\u003eSmart Charging, automatically regulates output for optimal charging\u003c\/li\u003e\n\u003cli\u003eFan Cooled for optimal performance in high ambient temperatures\u003c\/li\u003e\n\u003cli\u003eCompatible with Lithium, AGM, Program, Fixed Power Supply, and Flooded batteries\u003c\/li\u003e\n\u003cli\u003eRemote display included\u003c\/li\u003e\n\u003cli\u003e5 year warranty\u003c\/li\u003e\n\u003cli\u003eDimensions: 356 x 205 x 97 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.23 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_module et_pb_wc_price et_pb_wc_price_0_tb_body\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e12V 100A DC-DC Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFast charge your batteries with the Enerdrive | Dometic 12V 100A DC-DC Charger. With dual DC inputs for alternator and MPPT solar charging, the unit can draw power from either your vehicle’s alternator or solar panels.\u003c\/p\u003e\n\u003cp\u003eEngineered for high-output systems, this solution is the perfect match for vehicles, trucks, caravans, motorhomes, and marine vessels equipped with large alternators. Experience superior efficiency with a fully programmable remote LCD display and intelligent multi-stage charging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE:\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eDesigned for large 4WDs, utes, trucks, and marine applications with high‑output alternators (12V – 180A+).\u003c\/em\u003e\u003cbr\u003e\u003cem\u003ePlease consult your vehicle or engine handbook, or your dealer to confirm compatibility.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V 100A Output Current\u003c\/strong\u003e\u003cbr\u003eDelivers a powerful 12V output of up to 100A via alternator, and up to 80A from solar—ideal for fast‑charging large battery banks and supporting high‑demand 12V systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual DC Inputs\u003c\/strong\u003e\u003cbr\u003eCharge your battery from alternator input or MPPT solar input, with up to 100A available for ultra‑fast charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPPT Solar Charging\u003c\/strong\u003e\u003cbr\u003eThe integrated MPPT solar regulator delivers maximum output from your solar PV, ensuring fast and efficient battery charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti‑Stage Charging\u003c\/strong\u003e\u003cbr\u003eAdvanced charging algorithms and a multi‑stage charging process ensure your battery is ready faster and enjoys an extended lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntelligent Regulated Output\u003c\/strong\u003e\u003cbr\u003eThe DC‑DC charger automatically monitors and regulates its output, adjusting to the battery’s specific requirements for optimal charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser Adjustable\u003c\/strong\u003e\u003cbr\u003eThe default 100A charging current can be stepped down in 10A increments to suit various vehicles and power requirements (100A–10A).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan Cooled\u003c\/strong\u003e\u003cbr\u003eFor optimum performance, the DC‑DC charger is fan‑cooled to maintain consistent output even in high ambient temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Display Included\u003c\/strong\u003e\u003cbr\u003eComes with a fully programmable remote LCD display panel for easy remote monitoring and system control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5‑Year Warranty\u003c\/strong\u003e\u003cbr\u003eLong‑term peace of mind with lifetime support from the local Australian team—expert help is always available for troubleshooting or installation guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2026\/03\/12V-100A-DC-FLYER_4-PAGE-FLYER_2026_V1.6-MARCH_WEB-1.pdf\" rel=\"noopener\" target=\"_blank\"\u003e12V 100A DC FLYER_4 PAGE FLYER_2026_V1.6\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2026\/03\/EnerdriveDometic12V-100A-DC-DC-Charger_IOM_4445104722_APAC-en_A5_2026-03-24.pdf\" rel=\"noopener\" target=\"_blank\"\u003e12V 100A DC-DC Charger User Manual\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/enerdrive.com.au\/wp-content\/uploads\/2026\/04\/DC100-Diagram-scaled.jpeg\" rel=\"noopener\" target=\"_blank\"\u003eSystem Wiring Diagram\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52832248332573,"sku":"EN3DC100","price":1199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EN3DC100-Web-Images_01.png?v=1788012790"},{"product_id":"24v-30a-industrial-ac-battery-charger","title":"24V 30A Industrial AC Battery Charger","description":"\u003cdiv class=\"et_pb_module et_pb_wc_description et_pb_wc_description_0_tb_body et_pb_bg_layout_light  et_pb_text_align_left\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\n\u003cp\u003eThe Enerdrive | Dometic 24V 30A Industrial Battery Charger is built for exceptional durability and performance, making it the perfect choice for demanding industrial and on-board applications. Encased in a heavy-duty, heat-resistant aluminium case, it offers robust protection against the toughest conditions. With an IP66 waterproof rating, this charger is fully sealed against dust, moisture, and even powerful water jets, ensuring reliable operation in all environments. Its wide voltage inputs and output settings provide versatility, while the advanced multistage charging system supports a variety of battery types, including AGM, flooded, gel, and lithium. Ideal for use in electric vehicles, forklifts, floor cleaning machines, golf carts, and electric mobility scooters, the Enerdrive | Dometic charger is designed to meet your charging needs with ease. The user-friendly interface allows for quick updates to charge algorithms and easy access to downloadable data logs via a USB memory stick, offering added convenience for monitoring and maintenance.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecannot be programmed by Apple products.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_module et_pb_wc_price et_pb_wc_price_0_tb_body\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Enerdrive | Dometic 24V 30A Industrial Battery Charger is engineered to deliver reliable, efficient charging for industrial and on-board applications. Whether you’re managing electric vehicles, forklifts, or other heavy-duty equipment, this charger offers the performance and flexibility you need to keep your systems running smoothly, even in the toughest environments.\u003c\/p\u003e\n\u003cp\u003eBuilt to Last\u003cbr\u003eDurability is at the heart of the Enerdrive | Dometic Industrial Charger’s design. Encased in a heat-resistant heavy duty aluminium shell, it is ready to take on extreme conditions, from high temperatures to vibrations. The charger’s IP66 rating ensures it is fully protected from dust, moisture, and water jets, making it ideal for outdoor and industrial environments where reliability is essential.\u003c\/p\u003e\n\u003cp\u003eVersatile Battery Compatibility\u003cbr\u003eThe Enerdrive | Dometic Industrial Charger supports a wide range of battery types. With over 25 pre-programmed charge algorithms, it’s compatible with AGM, flooded, gel, and lithium batteries. The ability to create custom charging profiles further enhances flexibility, allowing you to optimise performance for a variety of battery chemistries, ensuring optimal charging performance and extending the lifespan of your batteries.\u003c\/p\u003e\n\u003cp\u003eEfficient High-Power Charging\u003cbr\u003eWith a powerful 30A output, the Enerdrive | Dometic Industrial Charger ensures your batteries are quickly and safely recharged. The charger also includes transient voltage protection, which shields both the charger and the connected batteries from damaging voltage spikes, adding an extra layer of safety.\u003c\/p\u003e\n\u003cp\u003eSmart, Programmable Features\u003cbr\u003eFor easy monitoring and optimisation, the Enerdrive | Dometic Industrial Charger comes with a USB port that allows you to download data logs and upload charge algorithm updates via a USB drive. This functionality is perfect for OEMs, technicians, and maintenance teams, as it provides valuable insights for troubleshooting, optimising battery performance, and reducing warranty claims. The ability to adjust settings and track charging history makes the Enerdrive | Dometic Industrial Charger a smart and adaptable solution for any operation.\u003c\/p\u003e\n\u003cp\u003eReliable, All-Weather Performance\u003cbr\u003eWhether your charger is exposed to rain, dust, or heat, the Enerdrive | Dometic Industrial Charger is built to keep working. Its IP66 rating ensures that even in challenging weather or industrial settings, it will continue to operate flawlessly. Designed to endure tough conditions, this charger provides peace of mind knowing that your equipment is protected from the elements.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic 24V 30A Industrial Battery Charger is the ultimate solution for efficient, reliable, and flexible charging. With its robust design, versatile compatibility, and smart features, it’s built to keep your equipment performing at its best, no matter the conditions.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecannot be programmed by Apple products.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Industrial-Charger-Manual_V-1.9.pdf?v=1788155704\" target=\"_blank\" rel=\"noopener\"\u003eEnerdrive | Dometic Industrial Battery Charger User Manual Rev: 1.9\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Charging-Algorithms-to-suit-the-Enerdrive-ePOWER-Industrial-Charger-2024.xlsx?v=1788155706\" target=\"_blank\" rel=\"noopener\"\u003eCharging Algorithms to suit the Enerdrive\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52836807508253,"sku":"EPI-2430","price":823.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EPI-2430_FINAL14012025.webp?v=1788155771"},{"product_id":"36v-20a-industrial-ac-battery-charger","title":"36V 20A Industrial AC Battery Charger","description":"\u003cdiv class=\"et_pb_module et_pb_wc_description et_pb_wc_description_0_tb_body et_pb_bg_layout_light  et_pb_text_align_left\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\n\u003cp\u003eThe Enerdrive Dometic 36V 20A Industrial Battery Charger is built for exceptional durability and performance, making it the perfect choice for demanding industrial and on-board applications. Encased in a heavy-duty, heat-resistant aluminium case, it offers robust protection against the toughest conditions. With an IP66 waterproof rating, this charger is fully sealed against dust, moisture, and even powerful water jets, ensuring reliable operation in all environments. Its wide voltage inputs and output settings provide versatility, while the advanced multistage charging system supports a variety of battery types, including AGM, flooded, gel, and lithium. Ideal for use in electric vehicles, forklifts, floor cleaning machines, golf carts, and electric mobility scooters, the Enerdrive Dometic charger is designed to meet your charging needs with ease. The user-friendly interface allows for quick updates to charge algorithms and easy access to downloadable data logs via a USB memory stick, offering added convenience for monitoring and maintenance.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product cannot be programmed with Apple products\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_module et_pb_wc_price et_pb_wc_price_0_tb_body\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Enerdrive | Dometic 36V 20A Industrial Battery Charger is engineered to deliver reliable, efficient charging for industrial and on-board applications. Whether you’re managing electric vehicles, forklifts, or other heavy-duty equipment, this charger offers the performance and flexibility you need to keep your systems running smoothly, even in the toughest environments.\u003c\/p\u003e\n\u003cp\u003eBuilt to Last\u003cbr\u003eDurability is at the heart of the Enerdrive | Dometic Industrial Charger’s design. Encased in a heat-resistant heavy duty aluminium shell, it is ready to take on extreme conditions, from high temperatures to vibrations. The charger’s IP66 rating ensures it is fully protected from dust, moisture, and water jets, making it ideal for outdoor and industrial environments where reliability is essential.\u003c\/p\u003e\n\u003cp\u003eVersatile Battery Compatibility\u003cbr\u003eThe Enerdrive | Dometic Industrial Charger supports a wide range of battery types. With over 25 pre-programmed charge algorithms, it’s compatible with AGM, flooded, gel, and lithium batteries. The ability to create custom charging profiles further enhances flexibility, allowing you to optimise performance for a variety of battery chemistries, ensuring optimal charging performance and extending the lifespan of your batteries.\u003c\/p\u003e\n\u003cp\u003eEfficient High-Power Charging\u003cbr\u003eWith a powerful 20A output, the Enerdrive | Dometic Industrial Charger ensures your batteries are quickly and safely recharged. The charger also includes transient voltage protection, which shields both the charger and the connected batteries from damaging voltage spikes, adding an extra layer of safety.\u003c\/p\u003e\n\u003cp\u003eSmart, Programmable Features\u003cbr\u003eFor easy monitoring and optimisation, the Enerdrive | Dometic Industrial Charger comes with a USB port that allows you to download data logs and upload charge algorithm updates via a USB drive. This functionality is perfect for OEMs, technicians, and maintenance teams, as it provides valuable insights for troubleshooting, optimising battery performance, and reducing warranty claims. The ability to adjust settings and track charging history makes the Enerdrive | Dometic Industrial Charger a smart and adaptable solution for any operation.\u003c\/p\u003e\n\u003cp\u003eReliable, All-Weather Performance\u003cbr\u003eWhether your charger is exposed to rain, dust, or heat, the Enerdrive | Dometic Industrial Charger is built to keep working. Its IP66 rating ensures that even in challenging weather or industrial settings, it will continue to operate flawlessly. Designed to endure tough conditions, this charger provides peace of mind knowing that your equipment is protected from the elements.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic 36V 20A Industrial Battery Charger is the ultimate solution for efficient, reliable, and flexible charging. With its robust design, versatile compatibility, and smart features, it’s built to keep your equipment performing at its best, no matter the conditions.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product cannot be programmed with Apple products\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Industrial-Charger-Manual_V-1.10-1.pdf?v=1788155912\" target=\"_blank\" rel=\"noopener\"\u003eIndustrial Charger Manual_V 1.10\u003cspan\u003e (December 2025)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Charging-Algorithms-to-suit-the-Enerdrive-ePOWER-Industrial-Charger-2024_1.xlsx?v=1788155912\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eCharging Algorithms to suit the Enerdrive\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52836809769245,"sku":"EPI-3620","price":823.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EPI-3620-EPI-4815_FINAL14012025.webp?v=1788155957"},{"product_id":"48v-15a-industrial-ac-battery-charger","title":"48V 15A Industrial AC Battery Charger","description":"\u003cdiv class=\"et_pb_module et_pb_wc_description et_pb_wc_description_0_tb_body et_pb_bg_layout_light  et_pb_text_align_left\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\n\u003cp\u003eThe Enerdrive | Dometic 48V 15A Industrial Battery Charger is built for exceptional durability and performance, making it the perfect choice for demanding industrial and on-board applications. Encased in a heavy-duty, heat-resistant aluminium case, it offers robust protection against the toughest conditions. With an IP66 waterproof rating, this charger is fully sealed against dust, moisture, and even powerful water jets, ensuring reliable operation in all environments. Its wide voltage inputs and output settings provide versatility, while the advanced multistage charging system supports a variety of battery types, including AGM, flooded, gel, and lithium. Ideal for use in electric vehicles, forklifts, floor cleaning machines, golf carts, and electric mobility scooters, the Enerdrive | Dometic charger is designed to meet your charging needs with ease. The user-friendly interface allows for quick updates to charge algorithms and easy access to downloadable data logs via a USB memory stick, offering added convenience for monitoring and maintenance.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecannot be programmed by Apple products.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_module et_pb_wc_price et_pb_wc_price_0_tb_body\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Enerdrive | Dometic 48V 15A Industrial Battery Charger is engineered to deliver reliable, efficient charging for industrial and on-board applications. Whether you’re managing electric vehicles, forklifts, or other heavy-duty equipment, this charger offers the performance and flexibility you need to keep your systems running smoothly, even in the toughest environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to Last\u003c\/strong\u003e\u003cbr\u003eDurability is at the heart of the Enerdrive | Dometic Industrial Charger’s design. Encased in a heat-resistant heavy duty aluminium shell, it is ready to take on extreme conditions, from high temperatures to vibrations. The charger’s IP66 rating ensures it is fully protected from dust, moisture, and water jets, making it ideal for outdoor and industrial environments where reliability is essential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Battery Compatibility\u003c\/strong\u003e\u003cbr\u003eThe Enerdrive | Dometic Industrial Charger supports a wide range of battery types. With over 25 pre-programmed charge algorithms, it’s compatible with AGM, flooded, gel, and lithium batteries. The ability to create custom charging profiles further enhances flexibility, allowing you to optimise performance for a variety of battery chemistries, ensuring optimal charging performance and extending the lifespan of your batteries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEfficient High-Power Charging\u003c\/strong\u003e\u003cbr\u003eWith a powerful 15A output, the Enerdrive | Dometic Industrial Charger ensures your batteries are quickly and safely recharged. The charger also includes transient voltage protection, which shields both the charger and the connected batteries from damaging voltage spikes, adding an extra layer of safety.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart, Programmable Features\u003c\/strong\u003e\u003cbr\u003eFor easy monitoring and optimisation, the Enerdrive | Dometic Industrial Charger comes with a USB port that allows you to download data logs and upload charge algorithm updates via a USB drive. This functionality is perfect for OEMs, technicians, and maintenance teams, as it provides valuable insights for troubleshooting, optimising battery performance, and reducing warranty claims. The ability to adjust settings and track charging history makes the Enerdrive | Dometic Industrial Charger a smart and adaptable solution for any operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliable, All-Weather Performance\u003c\/strong\u003e\u003cbr\u003eWhether your charger is exposed to rain, dust, or heat, the Enerdrive | Dometic Industrial Charger is built to keep working. Its IP66 rating ensures that even in challenging weather or industrial settings, it will continue to operate flawlessly. Designed to endure tough conditions, this charger provides peace of mind knowing that your equipment is protected from the elements.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic 48V 15A Industrial Battery Charger is the ultimate solution for efficient, reliable, and flexible charging. With its robust design, versatile compatibility, and smart features, it’s built to keep your equipment performing at its best, no matter the conditions.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecannot be programmed by Apple products.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Industrial-Charger-Manual_V-1.10-1.pdf?v=1788155912\" rel=\"noopener\" target=\"_blank\"\u003eIndustrial Charger Manual_V 1.10\u003cspan\u003e (December 2025)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Charging-Algorithms-to-suit-the-Enerdrive-ePOWER-Industrial-Charger-2024_1.xlsx?v=1788155912\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eCharging Algorithms to suit the Enerdrive\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52836811211037,"sku":"EPI-4815","price":823.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EPI-3620-EPI-4815_FINAL14012025_79c8783f-1578-4976-a9f9-0cece3b8d861.webp?v=1788156163"},{"product_id":"48v-35a-industrial-ac-battery-charger","title":"48V 35A Industrial AC Battery Charger","description":"\u003cdiv class=\"et_pb_module et_pb_wc_description et_pb_wc_description_0_tb_body et_pb_bg_layout_light  et_pb_text_align_left\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\n\u003cp\u003eThe Enerdrive | Dometic 48V 35A Industrial Battery Charger is built for fast charging, exceptional durability, and performance, making it the perfect choice for demanding industrial and on-board applications. Encased in a heavy-duty, heat-resistant aluminium case, it offers robust protection against the toughest conditions. With an IP66 waterproof rating, this charger is fully sealed against dust, moisture, and even powerful water jets, ensuring reliable operation in all environments. Its wide voltage inputs and output settings provide versatility, while the advanced multistage charging system supports a variety of battery types, including AGM, flooded, gel, and lithium. Ideal for use in electric vehicles, forklifts, floor cleaning machines, golf carts, and electric mobility scooters, the Enerdrive | Dometic charger is designed to meet your charging needs with ease. The user-friendly interface allows for quick updates to charge algorithms and easy access to downloadable data logs via a USB memory stick, offering added convenience for monitoring and maintenance.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecannot be programmed by Apple products.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_module et_pb_wc_price et_pb_wc_price_0_tb_body\"\u003e\n\u003cdiv class=\"et_pb_module_inner\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"yikes-custom-woo-tab-title yikes-custom-woo-tab-title-features\"\u003eFeatures\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Enerdrive | Dometic 48V 35A Industrial Battery Charger is engineered to deliver fast, reliable, efficient charging for industrial and on-board applications. Whether you’re managing electric vehicles, forklifts, or other heavy-duty equipment, this charger offers the performance and flexibility you need to keep your systems running smoothly, even in the toughest environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt to Last\u003c\/strong\u003e\u003cbr\u003eDurability is at the heart of the Enerdrive | Dometic Industrial Charger’s design. Encased in a heat-resistant heavy duty aluminium shell, it is ready to take on extreme conditions, from high temperatures to vibrations. The charger’s IP66 rating ensures it is fully protected from dust, moisture, and water jets, and is equipped with an IP66-rated fan, ensuring efficient heat dissipation even under high output. The Enerdrive | Dometic Industrial Charger is ideal for outdoor and industrial environments where reliability and fast charging is essential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Battery Compatibility\u003c\/strong\u003e\u003cbr\u003eThe Enerdrive | Dometic Industrial Charger supports a wide range of battery types. With over 25 pre-programmed charge algorithms, it’s compatible with AGM, flooded, gel, and lithium batteries. The ability to create custom charging profiles further enhances flexibility, allowing you to optimise performance for a variety of battery chemistries, ensuring optimal charging performance and extending the lifespan of your batteries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast and Efficient Charging\u003c\/strong\u003e\u003cbr\u003eThe Enerdrive | Dometic Industrial Charger charger offers fast charging with an output of up to 35A, allowing you to recharge your batteries quickly without compromising safety. This makes it good for applications that require fast turnaround times, such as golf carts and forklifts. The built-in transient voltage protection further ensures the charger and batteries are shielded from harmful voltage spikes, adding an extra layer of safety while maintaining optimal charging efficiency in demanding environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart, Programmable Features\u003c\/strong\u003e\u003cbr\u003eFor easy monitoring and optimisation, the Enerdrive | Dometic Industrial Charger comes with a USB port that allows you to download data logs and upload charge algorithm updates via a USB drive. This functionality is perfect for OEMs, technicians, and maintenance teams, as it provides valuable insights for troubleshooting, optimising battery performance, and reducing warranty claims. The ability to adjust settings and track charging history makes the Enerdrive | Dometic Industrial Charger a smart and adaptable solution for any operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliable, All-Weather Performance\u003c\/strong\u003e\u003cbr\u003eWhether your charger is exposed to rain, dust, or heat, the Enerdrive | Dometic Industrial Charger is built to keep working. Its IP66 rating ensures that even in challenging weather or industrial settings, it will continue to operate flawlessly. Designed to endure tough conditions, this charger provides peace of mind knowing that your equipment is protected from the elements.\u003c\/p\u003e\n\u003cp\u003eThe Enerdrive | Dometic 48V 35A Industrial Battery Charger combines fast charging, durability, and intelligent features into a reliable solution for all your battery charging needs. With its robust design, fast charging capabilities, and versatile compatibility, it provides exceptional performance, ensuring that your equipment operates at its best, regardless of the conditions.\u003c\/p\u003e\n\u003cp\u003e** Please note: This product\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ecannot be programmed by Apple products.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eResources\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul class=\"icon-nav-list\"\u003e\n\u003cli class=\"icon_error-oct_alt\" style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Industrial-Charger-Manual_V-1.10-1.pdf?v=1788155912\" rel=\"noopener\" target=\"_blank\"\u003eIndustrial Charger Manual_V 1.10\u003cspan\u003e (December 2025)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/Charging-Algorithms-to-suit-the-Enerdrive-ePOWER-Industrial-Charger-2024_1.xlsx?v=1788155912\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eCharging Algorithms to suit the Enerdrive\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dometic","offers":[{"title":"Default Title","offer_id":52836813865245,"sku":"EPI-4835","price":1306.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0786\/4025\/1165\/files\/EPI-4835_FINAL14012025.webp?v=1788156341"}],"url":"https:\/\/www.thebulletsa.com.au\/collections\/battery-chargers.oembed","provider":"Bullet Shooting Accessories","version":"1.0","type":"link"}